Follow SEM's four-step Plastic Refinishing Standard Operating Procedure (SOP) for consistent, professional results.

Download SOP

1. PREP & PRIME

Tip: If damage is present, refer to Plastic Repair Standard Operating Procedure first.

Clean with Scuff & Clean and a gray scuff pad. Rinse with water and dry with clean, lint-free cloth. Clean with SEM Solve, Plastic and Leather Prep or XXX Universal Surface Cleaner. Wipe clean in one direction with clean, lint-free cloth. Prime as per instructions.

2. GUIDE COAT & SAND

Apply Guide Coat Black or Premium Powder Guide Coat to dried primer. Sand with P320 - P400 grit. Finish sanding with P600 grit.

3. ADD TEXTURE IF NEEDED

Apply Texture Coating or Chip Guard as per instructions.

See our SOP on duplicating OEM textures.

4. PAINT

Apply Bumper Coater™ or Factory Pack™ as per instructions.

Note: check local VOC regulations to ensure compliance of all product in your area. Always wear OSHA required personal protection equipment (PPE) to ensure your safety.