SEM Blog Back

OEM Refinishing System Standard Operating Procedure (SOP)

Follow SEM's four step standard operating procedure (SOP) for refinishing support parts, cut-ins, and jambs to reduce labor up to 85%.

1. PREP

Clean with SEM Solve or XXX Universal Surface Cleaner. Wipe Clean in one direction with dry, lint-free cloth. Scuff with P320 grit or gray scuff pad. Blow off and wipe with track rag if needed.

2. EZ COAT™

Choose appropriate Ez Coat color. Apply 1 coat until hiding. Flash time achieved while moving across larger parts.

NOTE: Smaller parts may require 1 - 2 minutes to properly flash.

3. FACTORY PACK™

Choose appropriate Factory Pack color. Apply 1 coat until hiding. Flash time achieved while moving across larger parts.

NOTE: Smaller parts may require 1 - 2 minutes to properly flash.

4. 1K CLEAR

Choose 1K HS Clear or 1K HS Semi-Gloss Clear. Apply 1 coat until covered. Allow 30 - 60 minutes before assembly or installation.

WATCH & LEARN

Recent Posts

Stay Up To Date

Sign up to hear about our new products and current promotions.